ePubs

The open archive for STFC research publications

Full Record Details

Persistent URL http://purl.org/net/epubs/work/37171
Record Status Checked
Record Id 37171
Title The effect of plastic anisotropy on the residual stress within a 316L stainless steel bead-on-plate specimen
Contributors
Abstract Plastic anisotropy can affect the strains measured by neutron diffraction. If this is not properly accounted for significant errors can result in the calculated stresses. This paper illustrates addresses this issue using measurements of the residual strain field around a 60 mm long single weld bead deposited on the surface of a 17 mm thick stainless steel plate. Measurements were made on ENGIN-X, the engineering spectrometer at the ISIS facility of the Rutherford Appleton Laboratory (UK). Diffraction spectra from these measurements have been fitted using both single and multi-peak fitting approaches. Both residual strain and stress results have been presented for (111) and (200) single peak fits and compared to a multi-peak fit (Rietveld) analysis. Results from these analyses have revealed significant anisotropy in the response of the individual lattice planes. This effect is most severe in measurements carried out in the normal direction and is shown to be predicted using an elasto-plastic self-consistent model.
Organisation CCLRC , ISIS , ENGIN-X
Keywords neutron diffraction , intergranular stress , residual stress , time-of-flight , welding , anisotropy , ISIS 2006
Funding Information
Related Research Object(s):
Language English (EN)
Type Details URI(s) Local file(s) Year
Journal Article RESIDUAL STRESSES VII MATERIALS SCIENCE FORUM 524-525 (2006): 679-684. doi:10.4028/0-87849-414-6.679 2006
Showing record 1 of 1
RCUK
Science and Technology Facilities Council Switchboard: 01793 442000